Over the weekend I built the upstairs baby gate. You may remember earlier when I built the baby gate for the bottom of the stairs.
I built this one a few inches shorter to match the railings upstairs. I used the same walnut balusters that I used for the downstairs gate and poplar for the frame again.
Here is a picture of it ready for primer.
Once it was primered and painted I made another handrail out of heart pine.
Here is a picture of the railing after the rough cuts were made.
I dont have a round-over router bit of the correct size so I'm having to make the cuts on my table saw then round them over with a sander. After this picture was taken I used a dado blade on my table saw to make the recessed cut on the bottom of the railing so it will fit over the top of the gate, sorry I didnt get a picture of that.
Once the railing was sanded I used Red Chestnut stain from Minwax to get the correct tone to the wood then put on a coat of poly.
Once it dried I installed the railing then put up the gate.
Here are a few pics.
As you can see from the pictures I still have a lot of work to do upstairs. The railings and the balls on top of the newels will be stripped and stained, everything else will be repainted.